SECTION 5: SERVICE PROCEDURES
THERMOSTAT REPLACEMENT
Jackson glasswasher machines come equipped with thermostats to ensure proper ware washing results. Occasionally, some of these components may need replacing to maintain optimum performance.
Jackson offers all of the repair parts necessary for performing this task.
The instructions provided here are for maintenance personnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.
Warning: many of the instructions and steps within this document require the use of tools. Only autho- rized personnel should ever perform any maintenance procedure on the dishmachine!
PREPARATION
1.Power must be secured to the unit at the service breaker. Tag or lock out the service breaker to prevent acci- dental or unauthorized energizing of the machine.
2.Ensure that incoming water to the machine is secured either by use of a
3.The unit must be drained completely with the drain stopper removed.
STEPS
1. Remove the front door.
Removing the heater cover.
2.Remove the heater box cover with the 3/8” nutdriver to expose the heater. Set the cover and hardware to the side.
TOOLS REQUIRED
The following tools will be needed to perform this maintenance evolution:
1.3/8” Nutdriver
2.7/16” Nutdriver
3.7/16” Combination Wrench
4.Needlenose Pliers
5.Phillipshead Screwdriver
TIME REQUIRED
It is estimated that it will take (1) person twenty min- utes to perform this task, not including all of the items indicat- ed in the section entitled “PREPARATION”.
IMPORTANT NOTES
1.Read these instructions thoroughly before attempting this maintenance task. Become familiar with the parts and what actions need to be taken. This will save time in the long run!
Removing the terminals.
3.Using the pair of needlenosed pliers (if necessary), remove the terminals from the thermostat. Be careful not to damage the terminals or the wires or else they will have to be replaced.
Delta 1200 Technical Manual
Issued:
23
