Jackson jp-24b SPECIFICATIONS of the JP-24B/JP-24BF, Specification Information, Temperatures

(21.5) 5.65

(11.4) 3

(65.6°C) 150°F (82.2°C) 180°F

262

28

10

5

SECTION 1: SPECIFICATION INFORMATION

SPECIFICATIONS of the JP-24B/JP-24BF

PERFORMANCE/CAPABILITIES

OPERATING CAPACITY (RACKS/HOUR)

RACKS PER HOUR

DISHES PER HOUR

30

600

ELECTRICAL REQUIREMENTS

WASH MOTOR HP 3/4

NOTE: Typical Electrical Circuit is based upon (1) 125% of the full amperage load of the machine and (2) typical fixed-trip cir-

GLASSES PER HOUR

OPERATING CYCLE (SECONDS)

WASH TIME

DRAIN TIME

RINSE TIME

TOTAL CYCLE TIME (MINUTES)

600cuit breaker sizes as listed in the NEC 2002 Edition. Local codes may require more stringent protection than what is dis- played here. Always verify with your electrical service con- tractor that your circuit protection is adequate and meets all

applicable national and local codes. These numbers are pro-

82	vided in this manual simply for reference and may change
28	without notice at any given time.
10

2	RINSE		TYPICAL
	HEATER	TOTAL	ELECTRICAL
	VOLTS PH HZ RATINGS	AMPS	CIRCUIT

5 MINUTE TIMER OPERATING CYCLE (SECONDS) WASH TIME

DRAIN TIME

RINSE TIME

TOTAL CYCLE TIME (MINUTES)

TANK CAPACITY (LITERS) (GALLONS)

WASH TANK

RINSE TANK

208	1	50	6.7KW	40	50 AMP
230	1	50	8.2KW	43	60 AMP
208	1	50	8.2KW	47	60 AMP
230	1	50	10KW	51	70 AMP
220	1	50	9.15KW	48	60 AMP
208	1	60	6.7KW	39	50 AMP
230	1	60	8.2KW	46	60 AMP
208	1	60	8.2KW	42	60 AMP
230	1	60	10KW	50	70 AMP
460	1	60	480/8.2KW	11	15 AMP
460	1	60	480/9.6KW	14	20 AMP

TEMPERATURES

WASH --- (MINIMUM)

RINSE --- (MINIMUM)

WATER REQUIREMENTS

INLET TEMPERATURE (40° Booster Heater) (82.2°C) 140°F INLET TEMPERATURE (70° Booster Heater) (43.3°C) 110°F

GALLONS PER HOUR	(198.7L) 52.3
WATER LINE SIZE I.P.S. (Minimum)	(1.27 cm) 1/2”
DRAIN LINE SIZE I.P.S. (Minimum)	(3.81 cm) 1 1/2”
FLOW PRESSURE P.S.I.	20A5
FLOW, GALLONS PER MINUTE	(27L) 7.1

NOTE: Always refer to the machine data plate for specific electrical and water requirements. The material provided on this page is for reference only and may be subject to change without notice.

JP-24 Technical Manual 7610-002-49-79 Rev. D

Issued: 03-06-2006 Revised: N/A

3