Pump/Motor Switch (ON/OFF )
Pressing the button will turn ON the two speed pump/motor at HIGH speed. Pressing a second time will turn OFF the pump/motor. To change speeds use the Toggle buttons.
Pump/Motor Status LED
When the pump/motor is ON at HIGH speed all four LED indicator lights will be lit. When the pump/motor is ON at LOW speed the bottom LED indicator light will be lit.
Left Air Valve Switch
Pressing this button will activate the left air valves using the Toggle buttons to increase/decrease air flow to the left set of jets. The air flow can be adjusted from no air to maximum air.
Left Air Valve Status LED
The Left Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.
Right Air Valve Switch
Pressing this button will activate the right air valves. Use the Toggle buttons to increase/ decrease air flow to the right set of jets. The air flow can be adjusted from no air to maximum air.
Right Air Valve Status LED
The Right Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.
Bath Light Switch (ON/OFF )
Pressing this button will turn ON the white bath light(s). Pressing the Toggle buttons at this time will increase or decrease light intensity.
Pressing the button a second time will access the saved favorite color. To cycle lighting colors use the Toggle button. Pressing the Toggle button again will stop the light cycling. The color displayed when the cycle has been stopped will be saved as your favorite color.
Pressing the button a third time to turn OFF the light.
Wave Function Switch (ON/OFF )
Pressing this button activates wave action by opening and closing air valves. Pressing a second time will turn OFF the wave action.
When pressing this button after pressing the Pump/Motor button or the Air Valve button, the wave action will work on both Right and Left Air valves.
NOTE: When switching between functions, the LED for the inactive functions will dim and the active function will brighten.
Control Panel Switches
Left air valve, | Left air | Bath | Right air | Right air |
Status LEDs | valve | light | valve | valve, |
|
|
|
| Status LEDs |
Pump/Motor | Wave | Toggle | Air bath Blower | |
status LEDs | Pump/ | function | switches | status |
| Motor |
|
| LEDs |
Air Bath Switch
Pressing this button will activate the blower using the Toggle buttons to increase/decrease air flow from the blower. Blower air can be adjusted from low air to maximum air.
Air Bath Status LED
The Air Bath Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.
Toggle Switches
The Toggle buttons, up and down , act on each of the other switches to increase, decrease, or modify functionality. Use the up arrow to increase and the down arrow to decrease.
•Pressing a toggle button after pressing the Pump/Motor button will increase or decrease speeds on the Pump/Motor. If the pump/motor is on HIGH speed press the down arrow to select LOW speed. If the pump/motor is on LOW speed press the up arrow to select HIGH speed.
•Pressing an up or down toggle button after pressing the Bath Light button once will increase or decrease the white light brightness. Pressing an up or down toggle button after pressing the Bath Light button twice will begin cycling the light colors.
Leave the colors cycling or press the same toggle button again to stop the color cycling.
With the lights stopped on a color pressing the Bath Light button a third time will turn OFF the light. (A favorite color will be saved ONLY when the cycling has been stopped on that color and then turned OFF.)
(Continued)
Jacuzzi Whirlpool Bath: Finestra | Page 16 | FL61000B • 10/07 |
