PrO3 Ozone Sanitation System
The unit has a PrO3 Ozone Sanitation System installed. The ozone generator is set to operate as follows.
At the time the power is initiated, the ozone operates for thirty minutes, and then it will automatically shut off. Thereafter, every four hours, the ozone will operate for thirty minutes automatically and continuously.
NOTE: A soft noise is produced by the pump during operation of the equipment.
To Set Timer
Determine the best time for the ozone generator to operate. The ozone generator should be programmed to operate when the air bath is not in use. Six hours before use, interrupt the power to the air bath at the dedicated GFCI circuit breaker. Be sure to observe all safety precautions. When the dedicated GFCI circuit comes back on, the system is activated and the ozone timer is set to begin a regular cycle as scheduled.
CAUTION: In the event of a power outage, the timer period will need to be reset.
Jacuzzi Whirlpool Bath: Finestra | Page 18 | FL61000B • 10/07 |
