OPERATING INSTRUCTIONS (cont'd)
Electronic Control Panel Operation (with optional Chromotherapy/IllumatherapyTM lighting)
All tubs in this product line come with electronic controls and standard Chromotherapy or IllumatherapyTM. Read and follow the operation instructions for the control system of your unit.
General Functions
This Jacuzzi tub is equipped with a seven button electronic control panel. The seven button panel controls a two speed pump/ motor, Chromotherapy or IllumatherapyTM lighting, air controls, and wave control. LED lights (in the control panel) indicate function levels. When switching between functions, the LED for the inactive functions will dim and the active function will brighten.
The bath is equipped with a water level sensor(s). When the water level is below the sensor, the pump/motor can not be activated. If the ON/OFF pump/motor button is pressed at this time, the pump/motor will not operate. When the water goes above the water level sensor, the pump/motor can be activated. If the water level drops below the level sensor, the pump/motor will shut OFF. To restart the pump/motor after the water level goes above the level sensor, the ON/OFF pump/motor button must be pressed. The pump/motor will automatically shut off 30 minutes after the pump/motor was turned on.
NOTE: Ensure the water level sensor located inside the bath is free of any soap or dirt buildup.
ENGLISH
Normal Operation (with the bath filled to the proper level)
Pump/Motor Switch (ON/OFF )
Pressing the 
button will turn ON the two speed pump/ motor at HIGH speed. Pressing a second time will turn OFF the pump/motor. To change speeds use the Toggle buttons.
Pump/Motor Status LED
When the pump/motor is ON at HIGH speed all four LED indicator lights will be lit. When the pump/motor is ON at LOW speed the bottom LED indicator light will be lit.
Left Air Valve | Bath Light |
|
| Right Air Valve | |
|
| |
Left Air Valve |
|
|
Status LED |
| Right Air Valve |
|
| |
|
| Status LED |
Pump/Motor |
|
|
Status LED |
|
|
ON/OFF | Wave Function | Toggle Buttons |
Pump/Motor |
| |
|
|
Left Air Valve Switch
|
| Wave Function Switch (ON/OFF ) | |
Pressing this | button will acitvate the left air valves use | Pressing this | button activates wave action by opening |
the Toggle buttons to increase/decrease air flow to the left set | |||
of jets. The air flow can be adjusted from no air to maximum | and closing both right and left air valves. Pressing a second | |
time will turn OFF the wave action. | ||
air. | ||
|
Left Air Valve Status LED
The Left Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.
Right Air Valve Switch
Pressing this 
button will acitvate the right air valves. Use the Toggle buttons to increase/decrease air flow to the right set of jets. The air flow can be adjusted from no air to maxi- mum air.
Right Air Valve Status LED
The Right Air Valve Status LED will show four LED lights at maximum air and only one LED light when the air is turned OFF. Each additional LED indicates more air flow.
Bath Light Switch (ON/OFF )
Pressing this 
button will turn ON the white bath light(s). Pressing the Toggle buttons at this time will increase or de- crease light intensity. Pressing the button a second time will access the saved favorite color. To cycle lighting colors use the Toggle button. Pressing the Toggle button again will stop the light cycling. The color displayed when the cycle has been stopped will be saved as your favorite color. Pressing the button a third time to turn OFF the light.
NOTE: When switching between functions, the LED for the inactive functions will dim and the active function will brighten.
Toggle Buttons
The Toggle buttons, up 
and down 
, act on each of the other buttons to increase, decrease, or modify functionality. Use the up arrow to increase and the down arrow to decrease.
•Pressing a toggle button after pressing the Pump/Motor button will increase or decrease speeds on the Pump/Mo- tor. If the pump/motor is on HIGH speed press the down arrow to select LOW speed. If the pump/motor is on LOW speed press the up arrow to select HIGH speed.
•Pressing an up or down toggle button after pressing the Bath Light button once will increase or decrease the white light brightness. Pressing an up or down toggle button after pressing the Bath Light button twice will begin cycling the light colors. Leave the colors cycling or press the same toggle button again to stop the color cycling. With the lights stopped on a color pressing the Bath Light button a third time will turn OFF the light. (A favorite color will be saved ONLY when the cycling has been stopped on that color and then turned OFF.)
21
Jacuzzi Whirlpool Bath K339000X 3/06
