Jacuzzi Whirlpool Spa owner manual Normal Operation/Whirlpool System, Air Blower, Water Rainbow

www.clearcreekspas.com

OPERATION

Normal Operation/Whirlpool System

You can enjoy the spa with or without activating the whirlpool. Either way, bathing in your spa can be pleasurable, as well as therapeutic. After a busy, stressful day, you can look forward to soaking in your spa in still water with no turbulence—only the gentle warmth of the soothing and relaxing water.

For a more invigorating spa experience, you can take advantage of the built-in whirlpool system. To do this, press the JETS button for low or high speed JETS. Sit or recline in the spa so you are comfortable. Since all the jets are directionally adjustable, you can direct a jet toward an area where muscles feels tense or stiff. The warmth of the water and the stimulating water flow from the jets will pleasantly increase circulation.

For the total whirlpool effect and all over feeling of well being, you can adjust all jets so they point in a clockwise or counterclockwise direction to circulate the air and water mixture in a circular motion all about the spa.

Air Blower

The spa features a built-in air blower and factory drilled air holes in the seats of the spa to add to you enjoyment.

The blower sends air to a channel located under the spa©s seats; this air is distributed through the air holes, and as the pressurized air is released from the holes, tiny bubbles are formed. These bubbles travel upward through the water and expand until they reach the surface and burst. The exciting visual effect of the bursting bubbles contributes to the overall hydromas- sage experience.

DIRECTIONALLY ADJUSTABLE

WHIRLPOOL JETS

FULLY ADJUSTABLE

WHIRLPOOL JETS

Water Rainbow™

The Water Rainbow will add the soothing sound of a waterfall to your bathing pleasure as well as provide a beautiful cascade of shimmering water for an exciting visual effect.

Activate the waterfall feature by rotating downward the flow control lever located on the left side of the spout. Use this lever to adjust the amount of water flowing through the Water Rainbow. The waterfall effect will be greatest in the high-speed JETS mode. Turning OFF the flow at the fully adjustable jets will dramatically increase flow through the Water Rainbow.

CAUTION: The water circulating through the Water Rainbow spout is not fresh water and therefore is

NOT suitable for drinking.

WATER RAINBOW

Silent Air Induction

The intensity of the whirlpool action is determined by how much air is induced into the water. You control this by adjusting the air induction control knobs located on spa rim. For maximum air induction, rotate each control knob fully counter clockwise to the largest circle. For fewer air bubbles, decrease the amount of air induction by rotating the control knobs clockwise. When the knobs are turned to the smallest circles, only water is being circulated. (Refer to illustration below.)

INCREASE AIR FLOW (COUNTERCLOCKWISE)

DECREASE AIR FLOW

(CLOCKWISE)

AIR INDUCTION CONTROLS

8