www.clearcreekspas.com
Alternate Use of Water Rainbow® as Fill Spout
You can use your Water Rainbow as a fill spout by permanently plumbing it to a fresh water supply if local codes permit. Local plumbing codes may require the use of an
water supply with recirculating system of the spa.
To make the connections necessary to use the Water Rainbow as a fill spout, follow this procedure:
•Make sure spa is unplugged and completely drained.
•Unscrew the spout from the 3/4" pipe.
•Cut the 3/4" piping as shown in the illustration below.
•Cap the piping by cementing a 3/4" PVC cap where cut has been made.
•Connect permanent plumbing line to the spout.
WATER RAINBOW SPOUT | ||
SPA SHELL |
| |
INSTALL AND CEMENT | ||
3/4" PVC CAP HERE | ||
SAVE FOR LATER | ||
| ||
(IF DESIRED) |
| |
CUT PIPE HERE |
| |
| TEE LOCATED ON | |
| DISCHARGE | |
| PIPING | |
| SUGGESTED MODIFICATION | |
| (REFER TO LOCAL CODES | |
| FOR REQUIREMENTS) |
www.clearcreekspas.com