www.clearcreekspas.com
MAINTENANCE
Spa Light
Two filters , one blue and one red, are provided with your spa. To change the filter, simply snap the colored filters in place on top of the normal lens. Two replace- ment bulbs (GE#912, 12W, 12V) are also included. Put them in a safe place for future use. When a bulb burns out, replace it from the back of the light fitting on the outside of the shell by pulling out the bulb receptacle.
LIGHT BULB REPLACEMENT
LOCKING
NUT
LIGHT BULB
BULB
RECEPTACLE
NORMAL
LENS
COLORED
FILTER
LIGHT
BEZEL
SHELL
preserve the life of your cover, you must not sit, stand, or lie on it; nor should you place objects of any kind on top of it.
NOTE: Jacuzzi Whirlpool Bath does not guarantee or warrant this cover. Refer to spa cover manufacturer©s information provided with the cover.
SPA SHOWN WITH
INSULATING
COVER
Cleaning Your Spa
Your spa shell consists of two layers of plastic materials. Its smooth top surface of acrylic is tough and durable and contains concentrated color. This is sup- ported by a substantial thickness of
To clean your spa, simply use a mild, nonabrasive liquid detergent, isopropyl alcohol, or commercially pre- pared spa cleaner. Do not use abrasive cleaners. You can protect and restore the gloss to a dulled surface by applying Meguiar’s #10 Mirror Glaze, which is a product specifically designed for use on acrylic finishes. If Meguiar’s is not available, an acrylic polish of equal quality or automotive paste wax will do.
Use a spa cleaner for residue buildup at the water level of the spa surface. This may be applied to the acrylic surface with a soft cloth and wiped clean. Use sparingly in small amounts to avoid contaminating the spa water. If the water line is heavily soiled, it may be advisable to lower the water level
Repairs to the Acrylic
Minor scratches which do not penetrate the color finish (acrylic) can be removed with
Major scratches or gouges which penetrate the acrylic surface will require refinishing. Ask your Jacuzzi Whirlpool Bath dealer for special instructions.
Headrest Pillows
Clean the urethane pillows regularly with soap and water and a clean cloth. Use ARMORALL® or similar protective cleaning agent once a month to maintain the water resistance and lustrous finish. Position the head- rest pillow at least 3" above the spa water level. Remove the pillow from the spa if chlorine shock treatment is used.
