4.27Display parameters (ATT?)
Displays all the AT settings. The command for this is:
ATT?<CR><LF>
The modem responds with:
2, 3, 0, 010, 429.850000, XX, +00, XXX, 02, 05, 2, 020, 2, 08, 0, 0, 050, 1, 429.850000 <CR><LF>
The order of the data is: 2 | baud rate |
3 | parity |
0 | format mode |
010command mode guard time 429.850000 centre frequency
XX RSSI (if no received data, 1 - 10 otherwise) +00 radio channel
XXX data quality (if no received data, 66 - 256 otherwise)
02squelch
05 power
2channel step size
020test message period
2over air baud rate
08preamble blocks
0frame synch. tolerance
0invert symbol
050squelch delay
1enable/disable receive data output 429.850000 radio frequency
Note: where no data has been received to provide the data, or the command has not been enabled, X is displayed.
Hermes Operator Note | Page 25 of 32 |
