Jenn-Air 8112P342-60 important safety instructions T Roubleshooting, Problem, Solution

TROUBLESHOOTING

PROBLEM

Surface burner fails to light.

Surface burner flame lifts off ports.

The flame is uneven.

Surface burner flame is yellow in color.

SOLUTION

•Check to be sure unit is properly connected to power supply.

•Check or re-set circuit breaker. Check or replace fuse.

•Check power supply.

•Check to be sure burner is correctly rated for your kind of gas.

•Check to be sure burner ports or ignition ports are not clogged.

•Check to be sure ignitor is dry and clicking. Burner will not light if ignitor is damaged, soiled or wet. If ignitor doesn’t click, turn control knob OFF.

•Check to be sure burner cap is correctly seated on the burner base.

•Check to be sure a pan is sitting on the grate above.

•Contact an authorized Jenn-Air servicer.

•Burner ports may be clogged.

•Flame may need to be adjusted. Contact an authorized Jenn-Air servicer.

•Some yellow tips on the flame are acceptable when using LP gas.

•Contact an authorized Jenn-Air servicer.

9