Auto Convect Conversion (on some models)
The oven comes from the factory set for Auto Convect conversion. Auto Convect Conversion automatically reduces the set temperature by 25°F for Convect Bake and Convect Pastry. For Convect Roast, the control will alert you at 75% of the programmed roasting time to check foods for doneness. Convect roast temperatures are not reduced.
NOTES:
■When using Convect Bake and Convect Pastry with the Auto Convect Conversion option turned off, reduce the set temperature by 25°F.
■If Convect Roasting with the Auto Convect conversion option turned off, you will not be required to program a cooking time. Check food at 75% of the conventional time.
To deactivate Auto Convect conversion:
1.Press SETUP.
2.Use right Quickset pad to scroll to AUTO CONVECT.
3.Select AUTO CONVECT using the left Quickset pad.
4.Select OFF using the Quickset pad.
5.Press SETUP to exit the Setup menu.
To reactivate Auto Convect conversion:
1.Press SETUP.
2.Use right Quickset pad to scroll to AUTO CONVECT.
3.Select AUTO CONVECT using the left Quickset pad.
4.Select ON using the Quickset pad.
5.Press SETUP to exit the Setup menu.
C/F (Celsius/Fahrenheit)
The displayed temperature scale can be changed from Fahrenheit to Celsius.
To change the scale:
1.Press SETUP.
2.Use right Quickset pad to scroll to C/F.
3.Select C/F using the left Quickset pad.
4.Select the desired temperature scale using the Quickset pads.
5.Press SETUP to exit the Setup menu.
Sabbath Mode
The oven is set to shut off after 12 hours if you unintentionally leave it on. The Sabbath Mode overrides the
Only Bake or Cook/Hold Bake will operate when the oven is in Sabbath Mode. All other functions are invalid. If a function other than Bake or Cook/Hold Bake is in operation when Sabbath Mode starts, the function will be canceled.
■The oven must be idle to program Sabbath Mode.
■Sabbath Mode cannot be turned on if the keypads are locked out or when the door is locked.
■If the oven is baking when Auto Sabbath Mode starts, there will be no audible beeps.
■All prompts, messages and beeps are deactivated when the Sabbath Mode is active.
■If the oven light is desired while in Sabbath Mode, it must be turned on before the Sabbath Mode is set.
■The
■The Bake temperature can be changed during an Active Sabbath Mode. Simply press the Bake pad and then enter the desired temperature using the Quickset pads.
■Pressing the Cancel pad will cancel a Bake cycle; however, the control will stay in the Sabbath Mode.
■The day of the week and AM/PM must be set for Sabbath Auto Mode to operate correctly.
To activate Sabbath mode:
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before or after cooking.
Doing so can result in food poisoning or sickness.
1.Press SETUP.
2.Use right Quickset pad to scroll to SABBATH.
3.Select SABBATH using the left Quickset pad.
4.Select AUTO or MANUAL.
AUTO will automatically prompt you to enter a Bake temperature on Friday at 2 p.m. and stay in Sabbath mode for 33 hours. “SABBATH” and “SABBATH ENABLE” appear in the display for 90 minutes. If Bake or Cook/Hold Bake are desired during Sabbath Mode, they must be programmed during this
MANUAL sets the oven to Sabbath Mode for 72 hours. “SABBATH” and “SABBATH ENABLE” appear in the display for 5 minutes. If Bake or Cook/Hold Bake are desired during Sabbath Mode, they must be programmed during this
5.Select ON or OFF.
To cancel Sabbath mode:
1.Press CANCEL.
2.Press and hold SETUP for 5 seconds.
Temp Adjust
Oven temperatures are tested at the factory. It is normal to notice some baking time or browning differences between a new oven and an old one. As ovens get older, the oven temperature can shift.
You may adjust the oven temperature if you think the oven is not baking or browning correctly. To decide how much to change the temperature, set the oven temperature 25°F higher or lower than the temperature in your recipes, then bake. The results of the first bake should give you an idea of how much to adjust the temperature.
To adjust the oven temperature:
1.Press SETUP.
2.Use right Quickset pad to scroll to TEMP ADJUST.
3.Select TEMP ADJUST using the left Quickset pad.
4.Enter the desired temperature change using the number pads.
5.Use the Quickset pads to select
12