Disassembly Procedures

To avoid risk of electrical shock, personal injury or death; disconnect power and gas before servicing, unless testing requires power and/or gas.

Warming Drawer Hi-Limit Switch

Replacement (Select Models)

1.Remove unit from installation position, see “Removing and Replacing Range” procedure.

2.Remove front side trim, see "Front Side Trim Removal" procedure.

3.Remove warming drawer, see "Warming Drawer Removal (Select Models)" procedure.

4.Remove screws securing side panel to oven chassis.

5.Remove screws securing hi-limit switch to warming drawer support frame.

6.Label and disconnect hi-limit switch wire terminals.

7.Remove hi-limit switch from outside the warming drawer support frame.

NOTE: Do not pull hi-limit switch and wiring through cavity wall.

8.Reverse procedure to reinstall warming drawer hi- limit switch.

Oven Door Removal

!WARNING

To avoid risk of personal injury or property damage, do not lift oven door by the handle.

1.Open oven door slightly and grasp door on both sides.

2.Lift up and off the hinge receivers.

3.Reverse procedure to reinstall oven door.

Warming Drawer Track Disassembly (Select Models)

1.Remove warming drawer, see "Warming Drawer Removal (Select Models)" procedure.

2.Place door on a protected surface.

3.Remove screws securing front panel to glass panel.

4.Remove screws front panel to warming drawer.

5.Remove screws securing "sliding tracks" to warming drawer.

6.Reverse procedure to reassemble warming drawer.

Warming Drawer Disassembly

1.Remove warming door, see "Warming Drawer Removal (Select Models)" procedure.

2.Place door on a protected surface.

3.Remove screws securing front panel to glass panel.

4.Remove screws securing front panel to warming drawer.

5.Remove screws securing "sliding tracks" to warming drawer.

6.Reverse procedure to reassemble oven door.

NOTE: See page 30 for illustration.

Oven Door Disassembly

1.Remove oven door, see "Oven Door Removal" procedure.

2.Place door on a protected surface.

3.Remove screws securing door glass to oven door trim and frame (screws located along the top and bottom edge of oven door).

NOTE: Proceed with the following steps if replacing door handle.

4.Remove screws securing door handle to door glass.

5.Remove screws securing upper and lower shields.

6.Remove screws securing door baffle.

7.Remove oven door insulation.

8.Remove screws securing outer and inner door glass (and glass frame).

9.Remove oven door liner, if replacing.

10.Reverse procedure to reassemble oven door.

NOTE: See page 30 for illustration.

© 2006 Maytag Services

16026923

29

Page 29
Image 29
Jenn-Air JGS8860BD Warming Drawer Hi-Limit Switch Replacement Select Models, Oven Door Removal, Warming Drawer Disassembly

JGS9900BD, JGS8860BD, JGS8850BD, JGS8750BD specifications

The Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD are a series of high-performance gas cooktops designed for culinary enthusiasts who value precision and sophistication. These models are distinguished by their robust construction, modern aesthetics, and a range of innovative features that streamline the cooking process.

One of the key features across these models is the professional-grade burners. The JGS8750BD, for instance, boasts a powerful 20,000 BTU burner, perfect for high-heat searing and rapid boiling. In contrast, the JGS8850BD offers a versatile 15,000 BTU burner, catering to a variety of cooking needs, including simmering and sautéing. For more delicate tasks, the JGS8860BD showcases a 5,000 BTU burner designed for simmering sauces and cooking delicate dishes with precision.

Another notable characteristic of these cooktops is the incorporation of the Jenn-Air® Turbo Flame™ technology. This feature provides an exceptional level of control, allowing chefs to achieve the desired temperature with accuracy. This technology is particularly valuable for those who require consistent heat for intricate recipes and techniques.

The seamless stainless-steel design not only elevates the appearance of any kitchen but also offers easy cleaning and maintenance. The high-quality grates found on these models are designed for durability and stability, ensuring pots and pans remain securely in place during cooking. Additionally, the continuous surface grates facilitate effortless sliding of cookware from one burner to another.

The JGS9900BD stands out with its advanced electronic ignition system, which ensures that the burners ignite quickly and reliably, minimizing downtime in the kitchen. Safety is also a priority across these models, featuring flame failure detection that automatically shuts off the gas supply if a flame goes out.

In terms of size, these cooktops cater to different kitchen configurations, with varying configurations to suit individual preferences and space constraints. Whether you're an avid home cook or a professional chef, the Jenn-Air JGS8750BD, JGS8850BD, JGS8860BD, and JGS9900BD combine superior technology with elegant design, making them a valuable addition to any modern kitchen. This series exemplifies Jenn-Air's commitment to quality, performance, and aesthetics, ensuring an elevated cooking experience for all users.