Control Knobs
The knobsonthe controlpanelcan be removedwiththe controls in theOff position. Pull each knob straightfrom the shaft. Washknobs in warm soapywater or dishwasher;do not use abrasivecleansersor materials. To replace each knob, matchflat part of knob openingwiththe fiatof the shaft, returningin Off position. Important: Neveruseametal blade to pry knob off.
Control Panel Area and Clock Display Window
Wipe withpaper towelsdampenedwithsoapy water or g_asscleaner. Do not sprayany cleaning solutions directly onto the Display windowor use large amounts of soap and water. Do not scrub with S.O.S pads or abrasive cleansers.
Glass Window
Use any suitable glass cleaner or soapy water.Do not use excessive amountsof water whichmay seep behind the glass.Do not use abrasivecleaning agents.
Igniters
•Itis importantto keep igniterportopenings onburnersclear andfree of obstructions to avoid ignitionfailure and possiblegas buildup. Ifthe port openingsare blocked, use a toothpick to remove food particles.
•The igniter cap and stem can be cleaned with warm soapy water and a plastic scrubber. The wire electrode inside the cap can be cleaned with a small brush. Rinseand dry.
Surface Burner Assembly
The surface burner assembly can be cleaned with mi_d detergents and a plastic scrubber,or washedinthe dishwasher. To preventscratchingthe burnerheads,do not use abrasivecleansers or scrubbing pads. Do NOTclean in a
Note: Check to be sure all ports are open. To open clogged ports, insert a toothpick directly into each port.
Although the burner grate is durable, it will gradually lose its shine and/or discolor, regardlessof the care you take of it. This is dueto its exposureto the high temperature of the gas flames.
To preservethe porcelain enamel finish as long as possible, have a pan on the grate before you turn on the burner, and lower the flame when food reaches the desired cooking temperature.
46
