Jenn-Air SDV48600P manual If oven does not heat, If oven will not go through self-cleaningprocess

If oven does not heat:

•the oven controls may be set incorrectly.

•clock controls may be set for delayed start of oven.

If the oven light does not work:

•the light bulb is loose or defective.

•oven light does not work during serf-cleaningprocess,

If oven will not go through self-cleaning process:

•controls may be improperly set.

•check the clock controlledsettings and the current time of day on the clock.

If oven did not clean properly:

•oven may need longer cleaning time.

•excessivespills were not removedprior to self-cleaningprocess,

If oven door will not unlock:

•oven may not have cooled to safe temperature after self-cleaningprocess,

•electric current cominginto the oven may be off,

If foods do not broil properly:

•the oven controls may net be set properly.

•check rack position.

•voltage into house may be low.

If baked food is burned or too brown on top:

•food may be positionedincorrectlyin oven.

•oven not preheated properly.

If foods bake unevenly:

•the rangemay be installed improperly.

•checkthe oven rack with a level.

•staggerpans, do not allow pans to touch each other or oven wall.

•check instructions for suggested placementof pans on oven rack.

If oven baking results are less than expected:

•the pans being used may not be of the size or material recommendedfor best results,

•there maynot be sufficient room aroundsides of the pansfor properair circulation in the oven.

•check instructionsfor preheating, rack position and oven temperature.

•oven vent may have been blockedor covered,