The grill consists of two black grill grates and a grill burner. Only install the grill on the left side of your range.
To Install Grill Module
1.Before installing grill components, be certain control knobs are in the Off position.
2.Position the grill burner with mixer tube openings toward the orifices. Slide the burner towards the orifices until the igniter is in between front and rear grill sections. Lower into place until side openings are resting on the burner support pins.
3. Place the grill grates on the top of the rangetop.
remove the protective shipping coating. Heat the grill on Hi for 10 minutes and
use the vent system to remove any additional smoke during cooling.
NOTE: Before using the grill for the first time, heat the
To Remove Grill Module
1.Be sure control knobs are in the Off position. Remove grill components once they are cool.
2.Remove grill grates.
3. Lift the grill burner up off the support pins about 2 inches. Slide the burner away from the orifices.
17
