7.Place the door back into the stainless skin, keeping the edge protectors in place. Replace the two screws in the top and bottom.

8.Set the door aside.

Reverse Hinges

1.Unscrew and remove the top hinge. Replace the screws in the empty hinge holes.

2.Remove the screws from the bottom of the opposite side of the ice maker cabinet. Turn the top hinge upside down so that the hinge pin points up. Place the hinge on the bottom opposite side of the ice maker and tighten screws.

3.Remove the plastic hinge pin sleeve from the “old” bottom hinge and replace it on the new bottom hinge pin.

4.Remove the “old” bottom hinge screws and hinge. Replace the screws in the empty hinge holes.

5.Remove the screws from the top of the opposite side of the ice maker cabinet. Turn the hinge upside down so that the hinge pin points down. Place the hinge on the top opposite side of the ice maker and tighten the screws.

6.Remove the top hinge pin.

Reverse Door Catch

1.Remove the hole plugs from the opposite side of the door and set aside.

2.Remove the screws from the magnetic door catch and replace it on the opposite side of the door.

Replace Door

1.Place plastic hinge pin sleeve in the top hinge hole on the door. Align the door with the top hinge hole and replace the top hinge pin.

2.Replace the handle and handle screws (on some models).

Top Hinge

A

B

C

D

A. Hinge pin

C. Hinge

B. Hinge pin sleeve

D. Hex-head hinge screw

Bottom Hinge

A

B

C

 

D

A. Hex-head hinge screw

C. Hinge

B. Hinge pin sleeve

D. Hinge pin

3.Push the hole plugs into place on the opposite side of the door.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

4.Plug into a grounded 3 prong outlet.

9

Page 9
Image 9
Jenn-Air W10136129C manual Reverse Hinges, Reverse Door Catch, Replace Door, Top Hinge, Bottom Hinge