Jensen CR560X specifications Wiring, Install Half-sleeve, Fuse Adapters, Professional Tip

®

CR560X

Install Half-sleeve

Not needed for ISO-DIN (Japanese vehicle) installation.

3 Support Strap

(supplied)

Half-sleeve

(supplied)

1

Adapter

(optional)

2

1.Install adapter if necessary. Install half- sleeve into adapter from front of dash. It will be a tight fit.

2.Bend over tabs where possible to secure half-sleeve to adapter or inside of dash.

3.Install strap to strut under dash. Secure strap to an existing screw.

Wiring

Important

If wiring connections are made wrong, the unit will not operate properly and it could be damaged. Follow the installation instructions carefully, or have the installation handled by an experienced technician.

Professional Tip

Fuse Adapters

No convenient power wire? Install a fuse adapter having a spade connector.

Fuse

Fuse

Adaptor

Crimp on a matching connector and attach:

•Yellow wire–Fuse marked MAIN, BAT or PWR

•Red wire–Fuse marked ACCY (accessory), or RADIO

5

5588 CR560X_EIN.p65 5 2/29/00, 10:46 PM