®
CR560X
Professional Tip
Connections
Good wire connections are very important for best sound and
Splice
1.Strip 1/2 inch (12 mm) of insulation from both wires.
2.Wrap wires together
3.Fold wires over
4.Stretch electrical tape tightly over splice.
Professional Tip
Crimp Connections
Purchase crimp connectors and crimping tool. Connectors are color coded. This Jensen radio uses RED connectors
1.Strip 1/4 inch (6mm) of insulation from both wires.
2.Insert into connector.
3.Crimp tightly.
You can make permanent splices (using butt connectors) or select connectors that can be removed and reinstalled.
Splice
1
2
3
4
Strip Wire
1/2" (12mm)
Solder
Rosin core
solder
Heat wires not solder
Soldering
iron
1 | 2 | 3 |
Strip Wire |
|
|
1/4' (6mm) |
|
|
Solder
Solder is the best way to connect wires, but it takes skill and practice. Splice the wires (as shown above). Before taping, heat the wires (not the solder). When the wires are hot enough, touch the solder to the splice. The solder will flow over the wires. Stretch electrical tape tightly over splice.
Important:
Be very careful when soldering wires in your car. Cover nearby carpeting and seats to prevent damage from hot solder.
Professional Tip
Upgrading Your System
International Jensen makes a wide range of car stereo products that will make your car system sound better, great or INCREDIBLE!
Better Sound
Install a Jensen tape deck or CD player like you’re doing now. High power units can make your existing speakers sound better and play louder.
Great Sound
Replace your existing speakers with Jensen speakers. Many of our speakers will fit into your car without cutting or drilling. You can also add an amplified graphic equalizer to tailor the sound to your liking.
INCREDIBLE Sound
Jensen offers a full line of amplifiers, high- power speakers and subwoofers that can turn your car into audio dynamite. You can go loud, louder and loudest by selecting Jensen components from your retailer.
3
5588 CR560X_EIN.p65 | 3 | 2/29/00, 10:46 PM |
