®
CR560X
Disconnect Battery
Before you begin, always |
|
disconnect the battery |
|
negative terminal. | – |
+
Remove Old Radio
Your original car radio is installed in one of four ways, depending on the car.
Bracket Mounted
1.Remove dashboard faceplate
2.Unscrew brackets
3.Disconnect wiring harness and remove radio
EJ |
|
|
MUTE | BBE | LD |
SEEK |
| LOC |
|
| AMPM |
A•PS |
|
|
Removal Tool
Some cars use a special removal tool to release the radio.
1.Insert the tool(s)
2.Pull out the radio
3.Disconnect wiring harness and remove radio
EJ |
|
|
MUTE | BBE | LD |
SEEK |
| LOC |
|
| PMAM |
A•PS |
|
|
CH
Replacing an Aftermarket Radio
Use a screwdriver to bend tabs completely out of the way. Pull sleeve from dashboard. The sleeve should fit tightly and may be damaged unless you remove it carefully.
1Bend
Tabs
Flat
2 Pull Sleeve Out Caution: Edges are sharp. Use a rag or wear a glove.
ISO-DIN
1.Remove trim to expose DIN chassis.
2.Remove the
3.Unscrew screws from the sides.
4.Disconnect wiring harness and remove radio.
2
3
1
4
5588 CR560X_EIN.p65 | 4 | 2/29/00, 10:46 PM |
