BUTTON once in CD stop mode, Program No. “
” will light up and blink then press the CD SKIP/SEARCH FORWARD BUTTON to view the programmed track.
7.Repeat the procedure in step 6 above to view the rest of the programmed tracks one by one.
8.To cancel the programmed memory :
i.Press the CD STOP ! BUTTON once in CD stop mode.,
OR
ii. Open the CD DOOR in CD stop mode.
The “PROGRAM” Indicator will disappear from the LCD DISPLAY.
PLAYING MP3 DISCS
Note:
i.If skipping occurs during MP3 Disc playing, try turning the volume down.
ii.When MP3 disc is playing, do not open the CD DOOR.
1.Open the CD DOOR by pressing the CD DOOR at the “PUSH OPEN” mark located on the CD door.
2.Insert an MP3 Disc into the CD Compartment with the label or print side
facing up and close the CD DOOR.
Note: Ensure the CD DOOR is closed properly and locked in place.
3.Set the FUNCTION SWITCH to “CD” position.
4.Press the POWER BUTTON once.
The Player will start reading the CD. The total number of tracks on the disc will be
shown in the LCD DISPLAY after a while.
Note:
i.If there is no disc inside, “
” will be shown on the LCD DISPLAY.
ii. If the CD DOOR is not closed, the DISPLAY will show “ ”.
Play/Pause Mode
5.When the PLAY/PAUSE "#BUTTON is pressed during CD stop mode, the first track will be played. The Play
Indicator “"” will light up. The “
” Indicator will appear as well indicating that an MP3 Disc is being played. The LCD
DISPLAY will show the specific track number being played.
6.To select the specific musical tracks inside the MP3 Disc.
10
