VM9215BT

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following protective measures can be executed to prevent damage to the mechanism or monitor:

Table 2: Monitor Protective Measures

Obstruction

Self Protection

OPEN Button

Power

 

 

Pressed

Reconnected

Monitor loading

Monitor is

Monitor fully

Monitor is

out horizontally

automatically

extended

automatically

 

loaded into unit

horizontally

loaded into unit

Monitor loading in

Unit stops at

Monitor fully

Monitor is

horizontally

obstruction point

extended

automatically

 

 

horizontally

loaded into unit

Monitor loading

Unit stops at

Monitor swivels

Monitor swivels

out vertically

obstruction point

back to the unit

back to the unit

Monitor loading in

Unit stops at

Monitor swivels

Monitor swivels

vertically

obstruction point

back to the unit

back to the unit

After the protective procedure is executed, normal operation is resumed by pressing the OPEN button or disconnecting and reconnecting the power.

TFT Aspect Ratio

With the monitor open, press and hold the WIDE button on the monitor to adjust the aspect ratio as follows:

FULL

The entire screen is extended horizontally to the aspect ratio of 16 to 9. The extension ratio is the same at any point.

STANDBY

The screen becomes black. Touch the screen to resume.

15

Page 15
Image 15
Jensen VM9215BT operating instructions Monitor Movement Mechanism, TFT Aspect Ratio, Full, Standby