Jensen VM9215BT operating instructions IPod/ iPhone Operation, Accessing iPod Mode

VM9215BT

iPod®/ iPhone® OPERATION

This unit is Made for iPod® and iPhone®. You can control your iPod® and iPhone® via the touch screen to access Playlist, Artist, Albums, Songs, etc. Supported models include, but are not limited to the following:

•iPhone® 4S / 4 / 3GS / 3G and 1st Generation

•iPod® touch 4th / 2nd and 1st Generation

•iPod® nano 6th / 5th / 4th and 3rd Generation

•iPod® classic and iPod® with video

NOTE: Be sure your iPod® has the latest Apple firmware installed to avoid connectivity issues.

Opening/Closing the TFT Monitor

Open TFT Monitor

Press the OPEN button on the front panel or press the button on the remote control to activate the mechanism that moves the display panel into the viewing position.

Close TFT Monitor

Press the OPEN button on the front panel or press the button on the remote control to load the display panel back into the compartment.

Accessing iPod® Mode

The unit will automatically switch to iPod® mode when an iPod®, iPod® touch or iPhone® is plugged into the front or rear USB connector.

NOTE: For basic iPod® connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device . For iPod® video or photo playback, you must purchase the jLink-USB cable.

To return to the iPod® menu from any other source menu, touch SRC on the front panel until the iPod® menu appears on the screen, or choose the iPod® icon from the source menu (only available when an iPod® or iPhone® is connected to the USB connector).

57