Jensen VM9215BT operating instructions Managing Incoming Calls

VM9215BT

10.A prompt to pair or bond should appear on your mobile phone. Accept the request and initiate the process.

NOTE: Some mobile phones require a “pass key” or pairing code to connect. If your phone requires a pass key or pairing code, you will need to enter this number. The default pairing code for many wireless phones is “0000”. The default code for the unit is “1234”.

11.A prompt to enter a PIN number or passkey for the unit should appear. The default passkey for the unit is “1234”.

12.At this point a prompt stating that pairing is successful should appear. Another prompt should appear asking connect to the unit, Yes or No. Press Yes. The mobile phone and the unit should connect. The mobile phone should display a message similar to “Device Connected.”The mobile phone and the unit are now connected. VM9215BT will appear on the mobile phone list of devices.

Managing Incoming Calls

When connected to a Bluetooth® phone, the unit will mute audio output, pause CD play, and change to the Bluetooth screen below when a call is received. The incoming phone number or as-signed name for that number will appear in the top of the screen. An audible tone will sound from the unit and a graphic display will appear on the front panel. If the incoming call has no caller ID, the unit will display “Private Caller”.

1.Direct Entry icon: Touch to access the direct dial screen. Refer to the Direct Entry screen for further detail.

2. icon: Touch to answer an incoming call.

69