John Lewis JLBIOS602 Installation, Electrical Connection, Technical Data, Heating elements rating

Installation

Technical Data		Heating elements rating
Dimensions of recess		Conventional Oven (Top element+Bottom element) 1,800 W
Height	580 mm	Top element	800	W
Width	560 mm	Bottom element	1,000	W
Depth	550 mm	Fan Oven	2,000	W
		Inner Grill element	1,650	W
Dimensions of the oven cavity		Full Grill element	2,450	W
Height	335 mm	Pizza Oven	2,000 W/1,000 W
Width	395 mm	Thermal Grilling	1,675	W
Depth	400 mm
		Convection Fan	25 W
Oven capacity	53 litres	Oven Light	25 W
		Cooling Fan	25 W
		Total Rating	2,500	W
		Supply voltage (50 Hz)	230 V

Electrical Connection

The oven is designed to be connected to 230 V (50 Hz) electricity supply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L		-	Live terminal
Letter N		-	Neutral terminal
	or E	-	Earth terminal

THIS OVEN MUST BE EARTHED

The cable used to connect the oven to the electrical supply must comply to the specifications given below.

For Uk use only

Connection	Min. size	Cable / flex	Fuse
via	Cable/flex	type
• Cooker	2.5 mm2	PVC/PVC	20 A
Control		twin and
Circuit		earth

It is necessary that you install a double pole switch between the oven and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The switch must not break the yellow and green earth cable at any point.

I m p o r t a n t

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 60°C above the ambient temperature.

Before the oven is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed.

The manufacturer disclaims any responsibility should these safety measures not be carried out.

For Europe use	only
Min. size Cable/flex	Cable / flex type	Fuse
2.5 mm2	H07 RN-F, H05 RN-F,	15 A
	H05 RR-F, H05 VV-F,
	H05 V2V2-F (T90),
	H05 BB-F

5