John Lewis JLBIOS602 instruction manual When the oven is first installed, Before first use

When the oven is first installed

Remove all packaging, both inside and outside the oven, before using the oven.

When the oven is first connected to the electrical supply, wait for the display automatically show 12:00 and the symbol

flash.

Ensure the correct time of day is set before using the oven.

To set the correct time of day :

a)press Time function button and, while the symbol is flashing (Fig. 1), set the correct time of day by pressing buttons “ “ or “ “ (Fig. 2).

The time arrow symbol will disappear about 5 seconds after the correct time is displayed (Fig. 3).

b)if the symbol is not flashing anymore, press button Time function twice.

Then, proceed as described in point a).

Before first use

The oven should be heated without food.

To do that, proceed as follows:

—press button to switch on the oven.

—press button Oven function twice and select the

"Conventional Cooking" function (Fig. 4).

—set the temperature to 250 °C using the increasing push button “ “.

—Allow the oven to run empty for approximately 45 minutes.

—open a window for ventilation.

This procedure should be repeated with the "Fan

Cooking" and "Full Grill" function for approximately 5-10 minutes.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm water to which a little mild washing-up liquid has been added.

Before cooking for the first time, carefully wash the a c c e s s o i r e s .

To open the oven door, always hold the handle in the centre (Fig . 5) .

Fig. 1

Fig. 2

Fig. 3

Cooking duration				End of cooking
Minute timer				Time
	Oven	Fast	Time
	functions	heat-up	functions

Fig. 4

Fig. 5

8