Multi tab function

This appliance is equipped with the Multi tab function, that allows the use of combi detergent tablets.

These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose ("3 in 1", "4 in 1", "5 in 1" etc...). Check whether these detergents are suitable for your water hardness. See the manufacturers instructions.

Once this function is selected it will remain active for all following wash programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

When using the Multi tab function, the cycle durations may change. If this is the case, the running time for the programme is automatically updated on the digital display.

Activate/deactivate the Multi tab function before the start of a washing programme.

Once the programme is running, the Multi tab function can NO longer be changed. If you want to cancel the Multi tab function you have to cancel the programme setting and then deactivate the Multi tab function.

In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multi tab function

Press the Multi tab button, the Multi tab indicator light illuminates. This means that the function is active.

To deactivate the function press the Multi tab button, the Multi tab indicator light turns off.

If the drying results are not satisfactory we suggest that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Activate the rinse aid dispenser.

3.Set the rinse aid dosage to position 2.

•The activation/deactivation of the rinse aid dispenser is only possible with the Multi tab function active.

Activation/deactivation of the rinse aid dispenser

1.Press the On/Off button. The dishwasher must be in setting mode.

2.Simultaneously press and hold function buttons B and C, until the lights Glass, Rinse hold and Multi tab start flashing.

3.Press function button B, the lights Glass and Multi tab turn off while the light Rinse hold continues to flash. The digital display indicates the current setting.

rinse aid dispenser deactivated