5.To memorise the operation, switch off the dishwasher by pressing the On/off button.
If you decide to revert back to the use of individual detergents we advise that you:
1.Deactivate the Multi tab function.
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.
Select and start a washing programme
Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.
2.Check that the water tap is opened.
3.Press the On/Off button. The dishwasher must be in setting mode.
4.Press one of the two programme buttons to select a washing programme. When a programme is selected the corresponding programme light illuminates and the
programme time flashes on the digital display.
For the selection of the washing programme see "Washing programmes" chart.
Close the dishwasher door, the programme starts automatically. In the digital display the programme time is no longer flashing but fixed with static light.
The selection of the washing programme can be made with the door closed. Keep in mind that this way, once a washing programme has been selected you have ONLY 3 seconds in which you can select: another washing programme, delay start and half load option. After these 3 seconds the selected programme will start automatically.
21
