John Lewis JLDWW 906 instruction manual Setting and starting the programme with delay start

Models: JLDWW 906

1 36
Download 36 pages 272 b
Page 22
Image 22
Setting and starting the programme with delay start

Setting and starting the programme with delay start

1.After having selected the washing programme, press one of the delay start buttons until the flashing number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours.

2.Close the dishwasher door, the countdown starts automatically and the number in the digital display is no longer flashing but fixed with static light.

3.The countdown will decrease in steps of 1 hour.

4.Opening the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

5.Once the delay start has elapsed the programme will start automatically.

Warning! Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.

Cancelling a delay start or a washing programme in progress

Simultaneously press and hold the two Cancel buttons (B and C) until all the programme lights illuminate.

Cancelling a delay start will also cancel a washing programme. You have to set the washing programme again.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

Press the On/Off button; all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted

End of the washing programme

The dishwasher will automatically stop.

Zero appears in the digital display.

The light for the programme just ended remains illuminated.

The dishwasher's drying system is provided with a device that allows air to circulate inside the dishwasher to prevent residual steam recondensing on the dishes as water droplets. Once the washing programme has ended this device operates intermittently for another 20 minutes, as long as the dishwasher is switched on

If the On/Off button is pressed or the door is opened during these 20 minutes, the device will be automatically cancelled.

1.Switch off the dishwasher.

2.Open the dishwasher door, leave it ajar and wait a few minutes before removing the dishes; this way they will be cooler and the drying will be improved.

22

Page 22
Image 22
John Lewis JLDWW 906 Setting and starting the programme with delay start, Interrupt a washing programme in progress