John Lewis JLDWW 906 Technical data, Installation, Unpacking, Fitting under a counter

Models: JLDWW 906

1 36
Download 36 pages 272 b
Page 28
Image 28
Technical data

Technical data

Dimensions

Electrical connection - Voltage - Overall power - Fuse

Water supply pressure

Capacity

Weight

Width

45 cm

Height

85 cm

Depth

61 cm

 

 

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.

Minimum

0,5 bar (0,05 MPa)

Maximum

8 bar (0,8 MPa)

 

 

 

 

 

 

9 place settings

 

 

 

 

 

 

38 kg

Installation

Warning! It is dangerous to alter the specifications or attempt to modify this product in any way.

This appliance is heavy. Care should be taken when moving it.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.

Unpacking

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(Kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre- existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

28

Page 28
Image 28
John Lewis JLDWW 906 instruction manual Technical data, Installation, Unpacking, Fitting under a counter