Johnson Controls ACPU024 THRU 060 manual Unit Weights, Center of Gravity Clearances

279815-PTG-D-0408

TABLE 12: UNIT WEIGHTS
Unit Size	Shipping	Operating			Corner Weights			Economizer	Roof Curb
	Weight	Weight						(lbs.)	(lbs.)
			A		B	C	D
024	338	333	91		80	78	88
030	340	335	86		83	83	87
036	360	360	96		84	81	93	40	8" - 70
									14" - 75
042	348	343	94		83	80	91
048	384	379	103		90	87	99
060	500	495	135		117	113	130
						CENTER OF GRAVITY
					D
		FRONT		A		C
		OF

UNIT

B

26

FIGURE 4 - CENTER OF GRAVITY

TABLE 13: CLEARANCES

Unit Clearances

(Minimum)

Front	12"
Back	0"
Left Side (Filter Access)	24"
Right Side	24"
Below Unit1	0"
Above Unit2	36" (For Condenser Air
	Discharge)

1.Units may be installed on combustible floors made from wood or class A, B or C roof covering material.

2.Units must be installed outdoors. Overhanging structures or shrubs should not obstruct outdoor air discharge outlet.

NOTE: For units applied with a roof curb, the minimum clearance may be reduced from 1 inch to 1/2 inch

between combustible roof curb material and the supply duct.

Minimum clearance of 1" all sides for the first 3' of duct for 20 & 25 kW. Zero inches thereafter, for all other heaters, zero inch clearance all sides for entire length of duct.

3'

FLEXIBLE DUCT

COLLAR

Johnson Controls Unitary Products 23