DESCRIPTION
Chain oil tank (FIG. 5)
Chain sawmill with electric motor
On the saw carriage for sawmills that are fitted with an electric motor, the oil tank (25) for chain oil is located on the electric motor. The chain oil is pumped via a hose by a chain oil pump that is installed under the clutch drum in the console. The pump supplies the bar with chain oil when the sawmill is running.
Motor console for electric motor (FIG. 6)
The chain sawmill with electric motor is fitted with a console in which the motor, transmission and bar are installed. The console is installed in the saw carriage and is adjusted vertically with the idler adjustment screw. The console runs on skid rails with adjustable plastic guides.
Vibration damping plate for the chain saw (FIG. 7)
The chain saw is secured in a
Bar and chain (FIG. 7)
The bar and chain (A) are installed on the engine console (electric sawmill) and installed on the chain saw in accordance with the chain saw’s operator’s manual. The bar has the same mounting on both the sawmill with the chain saw and the electric saw mill.
Feed unit for chain sawmill with electric motor (FIG. 8)
The feed unit (A) is installed in the
FIG. 5 |
25 |
FIG. 6 |
FIG. 7 |
A |
9 |
FIG. 8 |
A |
English – 11 |
