5.Push the Rinse button. The display shows CLEANING.
After a moment the display shows ADD TABLET/ PRESS RINSE. 6.Open the ground coffee lid and drop in one white cleaning
tablet (Fig. 22). Your machine comes with a pack of two tablets. To order more tablets see chapter 22 "Supplies".
7.Push the Rinse button. The display shows CLEANING. The cleaning program will dispense hot foamy water in intervals through the coffee spout into the drawer.
8.When finished, the display shows EMPTY DRAWER.
9.Lift and remove the drawer. Empty the used coffee container and drawer and replace. The display shows READY indicating the machine is now ready to brew coffee again.
Attention: You can run a tablet cleaning cycle at anytime even if the machine does not prompt you,
•READY. Push and hold the Rinse button until display shows RINSE. The Dial illuminates.
•Turn the Dial until display shows CLEANING. Push the Dial. Display shows EMPTY DRAWER.
•Continue with step 3 above.
20c. DECALCIFYING PROCEDURE
The machine has an integrated decalcifying program. When the display shows DESCALE MACHINE / MACHINE READY it is time to decalcify the machine. You can still make coffee. However, it is highly recommended that you decalcify the machine within the next 3 to 4 days.
Please note: If you use the Clearyl water cartridge and the display shows DESCALE MACHINE / MACHINE READY, then your cartridge function is not activated. Follow the instructions in
chapter 16a to program the Clearyl Cartridge function. Important: The decalcifying program must not be interrupted.
DECALCIFYING AGENT: Only use our special decalcifying tablets. For supplies see chapter 22.
CAUTION: Never use vinegar or any other decalcifying agent. This might damage internal parts of the machine.
1.Push the Rinse button. The display shows EMPTY DRAWER.
2.Remove and empty the drawer and used coffee container and replace complete assembly (Fig. 21).
Important: Even if the drawer and the used coffee container are empty, you still need to remove the tray for approx. 20 seconds and then replace it. The display shows SOLVENT IN TANK.
3.Make sure the water tank is empty. Completely dissolve three of the large square tablets in 16 oz. of water and pour this mixture into the water tank.
4.Replace water tank. Place a large container (at least 20 oz.) underneath the frother.
5.The displays shows SOLVENT IN TANK OPEN TAP. Turn the Steam/Water Selector to the water symbol. The machine will pump the mixture through the frother in intervals. During this procedure the display shows DECAL ON. When this cycle is finished the display shows SHUT TAP.
6.Turn the Steam/Water Selector back to the cup symbol.
The display shows DECAL ON. Now the machine pumps the mixture through the coffee spout into the drawer.
7.When this cycle is completed the display shows EMPTY DRAWER. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and
21.
