Open the steam / hot water
HEATING
READY
Turn the Rotary Switch (1) until the required water quantity is displayed.
For example, 
120 ML
6. Rinsing the IMPRESSA
When the IMPRESSA is switched off and has cooled down, a rinsing operation is started when the machine is switched on again. When the machine is switched off, a rinsing oper- ation is started automatically.
Switch on the IMPRESSA using the ON/OFF key 
(3).
HEATING
PRESS
RINSE
Press the maintenance key 
(7).
RINSING
READY
7. Adjusting the water quantity for coffee
The indicated value in ML is a reference value and may deviate from the actual value
If you press the 
(6) the water quantity is doubled automatically.
You can change/stop the water quantity during the
You can adjust the water quantity in steps of 5 ML using the Rotary Switch (1).
READY
8. Drawing off 1 cup of coffee
You have the possibility of increasing the strength of the coffee at any time in the grinding process by pressing the 
again
For Example: by pressing the 
three times you get strong coffee.
STRONG
You can choose among three strengths at the push of a but- ton. The longer you press the 
(5), the stronger your coffee will be (Display: MILD/ NORMAL/ STRONG).
You can adjust the water quantity before the
You can stop the
You can check the water quantity used for the last
READY
Put a cup under the adjustable coffee spout (17).
Press the 
(5) until the required strength is displayed:
MILD
180 ML (water quantity last adjusted)
The illuminated ring (2) is active.
Turn the Rotary Switch (1) again to select the water quantity individually:
10
