During the steam
When the steam quantity is reached, the message CLOSE TAP is displayed.
Close the steam / hot water
STEAM
READY
At any time, you can stop dispensing steam at an earlier stage by closing the tap for dispensing steam/hot water (14).
As long as STEAM READY is on view in the display, the machine is ready to dispense steam.
Due to the system design, steam can still escape and some milk may continue to drip before the TAP is closed.
Now, move your cup with the milk foam and place it under the coffee spout and dispense the required coffee product. (Fig. 8) Your Cappuccino is ready.
13.1 Cleaning the Easy-Auto-Cappuccino Frother
To ensure that the
You will not be prompted by your IMPRESSA to rinse the
13.2 Rinsing the Easy-Auto-Cappuccino Frother
Carefully pull off the
Dismantle the
Thoroughly rinse all parts of the nozzle under running water.
Reassemble the
13.3 Cleaning the Easy-Auto-Cappuccino Frother
To ensure that the
You will not be prompted by your IMPRESSA to clean the
You can obtain the JURA
Place a container under the
Fill a second container with 2.5 dl of fresh water and add one capful of the
Dip the milk pipe into the second container with the
Press the steam
HEATING
STEAM
READY
To draw off steam open the steam / hot water
Draw steam until the container with the
This procedure cleans the
Close the steam / hot water
STEAM
READY
14