As long as STEAM READY os on view in the display, the machine is ready to dispense steam.
Fill the container with 2.5 dl of fresh water.
Dip the milk pipe into the container with the fresh water.
When READY appears in the display, press the steam prese- lect key (8) again to set the machine in readiness for the steam function.
Open the tap for dispensing steam/hot water (14) (Fig. 13) in or- der to draw steam.
Draw steam until the container with the fresh water is empty. This procedure rinses the
Cleaning of the
14. Switching off the IMPRESSA
To ensure perfect operation, please switch your IMPRESSA to standby mode with the (3) symbol first. Then switch the machine off with the power switch (21).
READY
Switch off the IMPRESSA using the ON/OFF key (3).
RINSING
An automatic rinsing operation is started.
You can programme the following stages:
Filter
Water hardness Aroma Temperature
TimeE Automatic
Automatic
Language
Display
|
| Programming key | (4) |
|
|
|
| ||
|
| Use the programming | key | (4) to open or quit the |
|
| |||
|
|
programming mode (no saving of values effected).
Rotary switch
Turn the Rotary Switch to change the adjusted values or to select the next programming step.
Press the Rotary Switch to check the values adjusted or to save the values selected
15.1 Programming the filter
Refer to Chapter 5.1 «Inserting the filter».
15.2 Programming the water hardness
Refer to Chapter 4 «Adjusting the water hardness».
15. Programming
When your IMPRESSA leaves the factory it is adjusted such that you can draw off coffee without having to change any settings. However, you can programme various parameters individually.
15.3Programming the aroma ROBUST or STANDARD
When the machine leaves the factory, the aroma is set to robust. If requested it can also be set to Standard.
15