Jura Capresso F505 manual De-scaling

18. De-scaling

Your IMPRESSA features an integrated de-scaling program. The de-scaling operation will take some 40 min.

Original JURA de-scaling tablets wich are specially designed for the de-scaling program of your IMPRESSA are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappro- priate de-scaling solvents.

If the IMPRESSA needs de-scaling, the corresponding mes- sage is displayed.

You can still draw off coffee or hot water/steam and start the de-scaling program later.

Before starting the de-scaling program, the machine must be switched off. Once started, the de-scaling operation must not be interrupted.

When using the de-scaling solvent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions.

In any case wait until the de-scaling solvent is used up and the tank is empty. Never refill de-scaling solvent.

 READY DECALCIFY

Switch off the IMPRESSA using the ON/OFF key (3).

Remove the Easy-Auto-Cappuccino Frother (15) (Fig. 17).

Press the maintenance key (7) until the following message is displayed:

 EMPTY

TRAY

Empty the tray

 NO –

TRAY

Insert the tray again.

 SOLVENT IN TANK

Completely dissolve the content of one blister (3 tablets) in a jug containing 0.5 litres of water, and fill the mixture in the water tank. Reinstall the water tank.

 OPEN TAP SOLVENT IN TANK

Put a sufficiently large container under the hot water spout (Fig. 17).

Open the steam / hot water draw-off valve (14) (Fig. 13).

 DE-SCALING

 CLOSE TAP

Close the steam / hot water draw-off tap (14).

 DE-SCALING

 EMPTY

TRAY

Empty the tray

 NO –

TRAY

Insert the tray again.

 FILL WATER

Rinse the water tank thoroughly and fill it with cold, fresh tap water. Install it again.

22