Jura Capresso F505 Drip tray missing, Fill coffee beans, Replacing the filter, IMPRESSA decalcify

Models: F5 F505

1 26
Download 26 pages 55.35 Kb
Page 20
Image 20
16.3 Drip tray missing

16.3 Drip tray missing

16.4 Fill coffee beans NO –

TRAY

If this information is displayed, the drip tray (20) is not installed properly or was not installed at all.

Insert the drip tray (20).

16.5 Replacing the filter READY

16.4 Fill coffee beans

16.6 Cleaning the IMPRESSA FILL BEANS

Refill beans as described in Chapter 2.4.

The message REFILL BEANS will disappear after you draw off your next cup of coffee.

We recommend that you clean the bean tank regularly before refilling beans, using a dry cloth. Before cleaning the tank, switch off the IMPRESSA.

16.5 Replacing the filter

After drawing off 50 litres, the filter cartridge will be used up. A message requesting you to replace the filter will appear on the display.

Refer to Chapter 5.2 «Replacing the filter».

16.6 Cleaning the IMPRESSA

After 200 draw-off operations or after 160 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.

16.7 IMPRESSA decalcify READY CLEAN

16.7 IMPRESSA decalcify

During operation, the machine will calcify. The degree of scaling depends on the hardness of the water in your region. The machine will inform you when de-scaling is required. You can still draw off coffee or hot water/steam. However, we recommend that you should de-scale the machine (Chapter 18) within the next few days.

16.8 General cleaning instructions READY DECALCIFY

16.8 General cleaning instructions

Never use scratching objects, pan cleaners, cleaning sponges or caustic chemicals to clean the machine.

Wipe off the case on the inside and outside using a soft, moist cloth.

Clean the replaceable hot water nozzle after each use.

To ensure that the Easy-Auto-Cappuccino Frother functions per- fectly, you should rinse it with water each time after preparing milk.

To ensure that the Easy-Auto-Cappuccino Frother functions per- fectly, you should clean it daily if you have prepared milk.

The water tank should be rinsed daily and refilled with fresh water.

If the water tank shows signs of scaling, remove the scaling using a commercial de-scaling solvent. Take out the water tank (Fig. 4).

Remove the Claris filter cartridge, if installed, before de- scaling the water tank.

20

Page 20
Image 20
Jura Capresso F505 Drip tray missing, Fill coffee beans, Replacing the filter, Cleaning the IMPRESSA, IMPRESSA decalcify