Jura Capresso F505 manual Dispensing Cappuccino with the Easy-Auto-Cappuccino Frother

You can adjust the steam draw-off time individually by turning the Rotary Switch (1) until the required SEC are displayed.

For example, 35 SEC

If you do not change the steam draw-off time settings using the Rotary Switch (1), the machine will use the settings last adjusted

During the steam draw-off operation, the message STEAM is displayed

When the steam quantity is reached, the message CLOSE TAP is displayed

Close the steam / hot water draw-off tap (14).

 STEAM

READY

As long as STEAM READY is on view in the display, the machine is ready to dispense steam.

Before CLOSE TAP, steam may still escape the system.

13.Dispensing Cappuccino with the Easy-Auto-Cappuccino Frother

Cappuccino comprises of one third each of Espresso, hot milk and milk foam. You produce the milk portion with the Easy-Auto-Cappuccino Frother (15).

When steam is drawn, a vacuum is produced which, with the aid of the Easy-Auto-Cappuccino Frother (15), draws in the milk and produces milk foam.

To ensure perfect function, the Easy-Auto-Cappuccino Frother (15) must be cleaned regularly.

Make sure that the nozzle is correctly fitted. If the nozzle be- comes blocked with particles of milk residue or is incorrectly assembled, a danger can arise during use whereby the nozzle may jump off.

 When using for the first time, remove the protective cover from
the Easy-Auto-Cappuccino Frother (15) (Fig. 6). The protective
cover is used only during transport as protection to prevent the
ingress of contaminated materials.
 Remove the milk pipe from the Welcome Pack and connect it to	E
the Easy-Auto-Cappuccino Frother (15).

Insert the other end of the milk pipe into a Tetra Pak of milk or connect it to a milk container (Fig. 7).

Place a cup under the Easy-Auto-Cappuccino Frother (15) (Fig. 7).

A useful addition is available for all lovers of milk speciali- ties in the form of high-quality vacuum milk containers. They keep the milk cool the whole day long and are opti- mally suited to the design of your IMPRESSA.

All original JURA accessories can be obtained from the specialist shop.

Press the steam pre-selection key (8).

 HEATING

 STEAM

READY

To draw off steam open the steam/hot water draw-off tap (14) (Fig. 13). The milkfoam is prepared.

The illuminated ring (2) is active.

You can adjust the steam draw-off time individually by turning the Rotary Switch (1) until the required SEC are displayed.

For example, 35 SEC

If you do not change the steam draw-off time settings using the Rotary Switch (1), the machine will use the settings last adjusted

Adjust the steam dispensing time to suit the size of your cup.

13