Jura Capresso Impressa F7 Fill Water, TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Models: Impressa F7

1 24
Download 24 pages 33.57 Kb
Page 22
Image 22

5.The displays still shows SOLVENT IN TANK / OPEN TAP. Turn the Steam/Water Selector to the water symbol. The machine will pump the mixture through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

6.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps the mixture through the coffee spout into the drawer.

7.When this cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows

FILL WATER.

8.Remove the water tank, rinse thoroughly, fill with cold fresh water and replace.

9.Place a large container (at least 20 oz.) underneath the frother. The display shows OPEN TAP.

10.Turn the Steam/Water Selector to the water symbol. The machine will pump hot water through the frother in intervals. During this procedure the display shows DECALC.ON. When this cycle is finished the display shows CLOSE TAP.

11.Turn the Steam/Water Selector back to the cup symbol. The display shows DECALC.ON. Now the machine pumps hot water through the coffee spout into the drawer.

12.When the cleaning cycle is completed the display shows EMPTY TRAY. Remove the container from underneath the frother. Carefully lift and remove the drawer, empty and thoroughly rinse all parts and replace. The display shows HEATING and then PRESS RINSE.

13.Push the Rinse Button. The machine will run a regular rinse

cycle and the display will show READY.

14.Clean front of machine and grid with a moist, soft cloth. Attention: You can run a decalcifying cycle at anytime even if the machine does not prompt you.

• Turn the machine off. Push and hold the Rinse button until display shows EMPTY TRAY.

• Continue with step 2 above.

21.TIPS FOR BETTER COFFEE Height adjustable coffee-spout

Adjust the height of the coffee-spout to the size of your cups.

Grinding

Please refer to chapter 8 "Adjusting the Grinder."

Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important it is to warm your cups.

Sugar and cream

Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. You can preheat milk and cream with the frother.

22.SUPPLIES AND ACCESSORIES

The following supplies are necessary to keep your machine in good working order:

Clearyl Water Filter Cartridge (model# 64533)

Special Cleaning Tablets (model# 62205)

Decalcifying Tablets (white, square) model# 61848

Please note: You must use decalcifying tablets if you do not use the Clearyl cartridge.

22.

Page 22
Image 22
Jura Capresso Impressa F7 Fill Water, TIPS FOR BETTER COFFEE Height adjustable coffee-spout, Grinding, Pre-warm cups