JVC 240-020-505 manual Playback, Playing Back a Disc, Playing Back a Finalized Disc

Playback

Playing Back a Disc

It is possible to playback a disc recorded on this DVD recorder.

Playback operation may vary according to whether finalization has been performed.

Playing Back a Disc before Finalizing

DISC IN ACTION setting made during recording

MENU	TITLE
The title menu (TOP MENU) will appear	Playback starts automatically from the first title.
2. Select the number of the title to be played.
Use the t, 8, 7, and 6 buttons to select the title number
for playback.

								BUSY
OPERATE								OPEN/CLOSE
								OPTION DV Y/C LINE
AUDIO			TITLE	CHAPTER				SET UP
CH1
	LPCM MPEG
CH2
PHONES	REV	STOP	PLAY	FWD	PAUSE	REC	TOP	SET
							MENU MENU

STOP button PAUSE button

PLAY button

Clearing Resume Data

●When the PLAYBACK&232C TYPE item on the SYSTEM MENU (1/2) screen is set to DVD, resume data will be cleared and the stop position will return to the beginning of the last title if the STOP button is pressed when in the Stop mode.

●When the PLAYBACK&232C TYPE item is set to VTR, resume data will not be cleared even if the STOP button is pressed when in the Stop mode.

●Resume data will be cleared upon ejecting the disc.

Operation

1.Insert the disc.

2.Play the disc.

Press the PLAY button.

●The final title is played.

3.Select still mode.

Press the PAUSE button.

●The machine enters still mode.

●If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.

4.Restart the play.

Press the PLAY button.

Upon reaching a title end, it will automatically jump to the next title and play back all titles.

When disc end is reached it will automatically enter stop mode. The stop position will return to the beginning of the last title.

5.To manually stop playback press the STOP button.

When the STOP button is pressed, the stop position will be registered and the next playback will start from the same position. (Resume feature)

3. Press the SET button to begin playback.

4.Set to Still mode.

This is done by pressing the PAUSE button.

●The DVD recorder enters Still mode.

●If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.

5.Restart playback.

Press the PLAY button.

The DVD recorder will behave as follows when title playback has ended.

These actions will depend on the setting made for TITLE END from the DVD MENU screen during recording.

TITLE END item setting during recording

Set to MENU	Set to REPEAT	Set to STOP	Set to NEXT TITLE
Enters stop mode and the title	Repeats playback within the	Enters the stop mode. The title	Next title is played. When
menu (TOP MENU) is displayed.	title.	menu (TOP MENU) is not	playback of the final title
		displayed.	finished, the first title is played.
		Stops at the beginning of the	(Disc repeat playback)
		first title.

6.Stop playback.

This is done by pressing the STOP button.

●The DVD recorder enters Stop mode.

●When the STOP button is pressed, the stop position will be registered and the next playback will start from the same position. (Resume feature)

Clearing Resume Data

●Resume data will be cleared upon ejecting the disc.

Playing Back a Finalized Disc

When a disc is finalized, its title menu will be used to create the top menu.

The action taken by this DVD recorder when a disc it has finalized is inserted or when playback of a title has ended will depend on the settings of DISC IN ACTION and TITLE END as set on the DVD MENU screen during recording.

* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been finalized.

				BUSY
OPERATE				OPEN/CLOSE
				OPTION DV	Y/C LINE
AUDIO	TITLE	CHAPTER			SET UP
CH1	DOLBY DIGITAL
	LPCM MPEG
CH2
PHONES	REV STOP PLAY	FWD PAUSE REC	MENU MENU	SET	Cursor buttons
			TOP
	STOP	PAUSE		SET button

PLAY button

1.Insert a disc.

Depending upon the DISC IN ACTION item settings of the DVD MENU screen during recording, the operation will differ. Operate in accordance with the table below.

A Disc Set with No Menu

If a disc with DVD MENU TYPE item of the DVD MENU screen set to NONE is inserted, the title 1 will automatically play.

When the end of the title is reached the next title will be played.

Precaution regarding the playback

●During playback of a disc, if the input setting is DV then the sound can be delayed. In this case, change the input setting to LINE or Y/C.

●If the disc is dirty or damaged good playback may not be possible. In this case either clean the disc or change it.

●When playing back an unfinalized disc containing mixed data such as screen aspect ratio of 4:3, squeezed, and letterbox format or a menuless disc, the wide information is not always correctly output.

54 55