GENERAL OPERATION
Switching on/off with Mains switch
●To turn the TV set ON, press the Mains ON/OFF switch. The power indicator illuminates to show the power is on.
●To turn the TV set OFF, press it again.
If no picture appears but the power indicator is on, press the 
button, P 
, P 
, P▲, P▼ or
Switching into/from Standby Mode
●To turn the TV set into standby mode, press the
button. The power indicator illuminates more brightly.
●To turn the TV set ON from standby mode, press any of the
following buttons: 
, P 
or P 
, 0 - 9 Numeric buttons.
✐The Mains ON/OFF switch must be in the ON position before the using remote control transmitter.
✐Standby mode is used for switching the TV set off for short periods of time. In standby mode the TV is switched off but is still receiving mains power.
If you found a power indicator flashing, please turn the TV set off completely with the Mains
!ON/OFF 
switch and contact our service per- sonnel.
This warning is a sign to let you know that the power protection function of this TV set is now operating.
■Auto Shut Off
This TV set will automatically switch into the standby mode, 10 minutes after a signal is no longer received. The time until the set will switch off is displayed on the screen.
✐If the aerial is removed the TV set will automatically switch into the standby mode after 10 minutes.
✐When the TV set is switched on by using the
OFF 0:10
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | ENGLISH |
| P |
| |
| 0 |
|
|
| CS | BASS |
|
|
| P. MODE / OK |
|
AV |
| MENU |
|
P 
VCR 
DVD
I/II | 16:9 |
TV
Programme Selection
■Up/Down Programme Selection
Press the P▲ or P 
button to select the next programme number.
Press the P▼ or P
button to select the previous programme number.
■Direct Programme Selection
For selection of programme position
numeric button(0-9).
For selection of programme position
99
0
1
2
3
7
