JVC AV-28WFT1EI 1657, Press the red button to start the ID func- tion, To cancel the ID function

INSTALL

4Press the ï button to change the Pro- gramme number (PR) of a TV channel to a new Programme number (PR).

,'

1 Press the ë buttons to choose a TV channel.

Every time you press the ë buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) ap- pears on the screen.

2Press the red button to start the ID func- tion.

Note:

∙You can register your unique Channel name (ID) to

the TV channel. When step 3 is completed, do not go to step 4, but press the ìbuttons to move the cursor and the ëbuttons to choose a character for completing the Channel name (ID). Then press the 3button to register the Channel name (ID) to the TV channel.

,16(57

Preparation:

∙A CH/CC number unique to this TV and corresponding to the Channel number of a TV channel is required. Find the corresponding CH/CC number from a table “CH/CC NUMBER” on page 28 based on the Channel number of the TV channel.

3Press the ë buttons to choose the first character of a Channel name (ID) you want to attach to the TV channel.

1Press the ë buttons to choose a Pro- gramme number (PR) for which you will register a new TV channel.

2Press the green button and start the IN- SERT function.

To cancel the INSERT function:

Press the 9(Information) button.

4Press the blue button to display the ID LIST (channel name list).

5Press the ë buttons to choose the Chan- nel name (ID).

To cancel the ID function:

Press the 9(Information) button.

6Press the 3 button to register a Channel name (ID) to a TV channel.

3Press the ë buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel.

To cancel the INSERT function:

Press the 9(Information) button.

4Press the Number button to enter the re- maining CH/CC number.

The TV shifts to registration mode.

When the registration is completed, the picture of the TV channel appears on the screen.

Note:

∙The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot de- tect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a pic- ture in the no-signal state appears.

5: