JVC AV-28WFT1EI, LCT0622-001A-U $,7,21$/#018#235$7,216, 8VLQJ#WKH#&25#+705,##, Ixqfwlrq

$'',7,21$/#0(18#23(5$7,216

■'RZQORDGLQJ#WKH#GDWD#WR#9&5

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution:

∙Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

∙Only when the T-V LINK menu is being displayed, this oper- ation is enabled.

1Turn on the VCR.

2Press the 3 button.

The data transmission begins.

The T-V LINK menu disappears once the data transmis- sion ends.

When the T-V LINK menu is changed over to another menu:

The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.

Note:

∙If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, ensure the following three items are cor- rect; then press the 3button to retry data transmis- sion.

−Has the T-V LINK compatible VCR been connect- ed to the EXT-2 terminal?

−Has the VCR power been turned on?

−Does the SCART cable that is connected to the EXT-2 terminal to T-V LINK compatible VCR have all proper connections?

■8VLQJ#WKH#'(&2'(5#+(;705,##

IXQFWLRQ

When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the Decoder power.

2Display the TV channel capable of being unscrambled with the Decoder on the TV.

Even if the Decoder is functioning, a scrambled picture appears at this time.

3Press the 3 button to display the MENU.

The MENU (main menu) appears.

4Press the ë buttons to choose FEA- TURES. Then press the 3 button.

The FEATURES menu appears.

5Press the ë buttons to choose DECOD- ER (EXT-2) . Then press the ì buttons to choose ON.

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the ì buttons to choose OFF.

6Press the 3 button to complete the set- ting.

The T-V LINK menu appears.

7Follow the operating procedure “Down- loading the data to VCR” on page 30 to transmit the Programme number (PR) data to the VCR.

8If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7.

Note:

∙If for some reason the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

−Has the Decoder been connected to the VCR properly according to the VCR and Decoder In- struction Manuals?

−Has the Decoder power been turned on?

−Can the TV channel be unscrambled with a De- coder?

−Is it necessary to change the VCR settings in or- der to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR In- struction Manual.

63