JVC AV32L2EU, AV28L2EU, AV32X10EU, AV28X10EU, AV32H10EU, AV28H10EU Turn on the Decoder power

ADDITIONAL MENU OPERATIONS

2Press the 6 buttons to choose AUTO PROGRAM. Then press the a button.

ACOUNTRY menu appears as a sub-menu of the AUTO PROGRAM function.

There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY as follows:

5Press the 6 buttons to choose DECOD- ER (EXT-2). Then press the 5 buttons to choose ON.

An unscrambled picture appears.

To cancel the DECODER (EXT-2)function:

Press the 5 buttons to choose OFF.

	BACK	START		BACK	START
TV	OK	MORE	TV	OK	MORE

D0003-EN

3 Press the 5 and the 6 buttons to choose a country.

4Press the a button to complete the set- ting.

The menu disappears.

To return to the INSTALL menu from the COUNTRY menu:

Press the h(Information) button instead of the a but- ton.

■Using the DECODER (EXT-2)

function

When connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the Decoder power.

2Display the TV channel capable of being unscrambled with the Decoder on the TV.

Even if the Decoder is functioning, a scrambled picture appears at this time.

3Press the a button to display the MENU.

The MENU (main menu) appears.

4Press the 6 buttons to choose FEA- TURES. Then press the a button.

The FEATURES menu appears.

FEATURES

SLEEP TIMER

BLUE BACKOFF ON

CHILD LOCK

DECODER(EXT-2) OFF ON

BACK

TV OK

6Press the a button to complete the set- ting.

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV VCR

BACK

TV OK

EXIT

D0005-EN

7Follow the operating procedure “Down- loading the data to VCR” on page 28 to transmit the Programme number (PR) data to the VCR.

8If you have another TV channel capable of being unscrambled with a Decoder, repeat steps 2 through 7.

Note:

•If for some reason the DECODER (EXT-2)function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

−Has the Decoder been connected to the VCR properly according to the VCR and Decoder In- struction Manuals?

−Has the Decoder power been turned on?

−Can the TV channel be unscrambled with a De- coder?

−Is it necessary to change the VCR settings in or- der to connect the Decoder? Confirm that the VCR is set properly by rechecking the VCR In- struction Manual.

ENGLISH

D0023-EN

29