Connections
1) Connect the antenna or cable TV wire from the wall outlet, in to the RFInput of the two-w ay
splitter.
2) Connect an RFcable from the one of the RFOutputs on the splitter, in to the RF Input on
the back of the VCR.
3) Connect an RFcable from the other the RFOutput on the splitter, in to the RF Input on the
back of the TV.
4) Connect the yellow video cable out from the VCR’sVideo Output, in to the TV’s Video Input
jack, ORconnect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video
input.
5) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR’s RightAudio Output, in to the TV’s Right
Audio Input jack.
•If your VCRis a mono sound unit, it will have only one Audio Out jack. Connect it to the
TV’s Left Audio Input.
• Please consult your VCR’s owner’s manual for more information on its operation.

There are three basic types of antenna or cable connections:

•If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access all the chan-
nels, please refer to Diagram #2.If you cannot operate your Picture-In-Picture
function using Diagram #2, try the connection shown in Diagram #3. It is possible y o
cable box allows the signal of only one channel at a time to be sent to your television.
•If you have a cable system that requires the use of a cable box to access certain
premium channels, but not “basic”cable channels, please refer to Diagram #3.
• For your convenience, connection to a VCR is also shown in the following diagrams. A
VCR is not necessary for operation of the television or Picture-In-Picture (PIP) function.
You may omit the VCR from your connections if you wish.
• For instructions on connecting a VCR only, please see the Quick Setup on page 9.
• For information on using PIP, please see page 44.
•The PIPfeature is a vailable on models AV-36F802,AV-32F802 and AV-27F802 only.
Cable and VCR Connections
11
Illustration of AV-27F802
Diagram #1
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 11