9
Cable/RFconnector

Step Two - Making Basic Connections

Next you will need to connect your television to an antenna or cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where
a cable box is required, see pages 11 to 13.
1) Connect the yellow video cable out from the VCR’sVideo Output, in to the TV’s Video
Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s
S-Video input.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR’s RightAudio Output, in to the TV’s Right
Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power
outlet and turn on the television.
1) Connect an RF cable out from the wall outlet in to the RFInput on the back of the TV.
+

Proceed to Step Three

Quick Setup 2

Illustration of AV-27F802
You may also wish to connect a VCR at this point. A basic VCRconnection is shown below.
For detailed instructions on connecting a other components or a home theater system, see
pages 14 to 16.
NOTE:AVCRis not required to operate your television.
Illustration of AV-27F802
AVCables/Plugs
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 9