10
Press the buttons to move to AUTOTUNER SETUP
Press the buttons to begin AUTO TUNERSETUP
To choose CABLE (if you are connected to a cable system) or AIR (if you use
an antenna)
To move to START
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can
receive. This will take one or two minutes.

NOW

PROGRAMMING!

48

TUNER MODE : CABLE AIR

START

Step Three - The Plug In Menu

When you turn your television on for the first time the Plug In Menu will appear. This menu
sets some of the basic settings for your television. A complete description of the Plug In Menu
can be found starting on page 22. We recommend you complete the Plug In Menu items
before you start using your television. But to begin watching your television right away you only
need to run the Auto Tuner Setup.This lets your television learn the channels it is able to
receive. To run the Auto Tuner Setup follow the steps below.
The Auto Tuner is finished when the message PROGRAMMINGOVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
PLUG IN MENU
LANGUAGE ENG FRE SPA
AUTO TUNER SETUP
SET CLOCK
FINISH
SELECT BY
OPERATE BYEXIT BY EX
IT

The Quick Setup

is complete

Quick Setup 3
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 10