Remote Programming
Setting the CATV,VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver,VCR or DVD
player by using the instructions and codes listed below. If the equipment does not respond
to any of the codes listed below or to the code search function, use the remote control sup-
plied by the manufacturer.
Cable Box or Satellite codes
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to “CATV”.
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the Cable Box/Satellite receiver.
If your CATVor Satellite box does not respond to the first code, try the others listed. If it
does not respond to any code, try the Search Codes Function, on page 50.
18
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 18