Remote Programming
20
DVD codes
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVDplayer brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV”and the other 2-w ay selector switch to “DVD”.
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAY button.
6) Confirm the operation of the DVDplayer.
• If your DVDplayer does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 50.
•After you program your remote, some DVD buttons may not work properly. If some buttons
do not work properly, use the remote control which came with your DVD player.
AV-27,32,36F7/802 A 9/4/01 9:44 AM Page 20