JVC CA-DXT7 ¤ To adjust the voltage selector, Preparing the remote control, When using the remote

To remove the speaker grilles of the front speakers

Holes

Projection

Speaker grille

¤To adjust the voltage selector

Use a screwdriver to rotate the voltage selector so that the voltage mark is pointing at the same voltage as where you are plugging in the unit. (See also the back cover page.)

Preparing the remote control

	When using the remote
	control, point the top of the
	remote control toward the
	remote sensor as directly as
	possible. If you operate it
	from a diagonal position,
	the operating range (approx.
R6(SUM-3)/AA(15F)	5 m) may be shorter.

•Dispose of batteries in the proper manner, according to federal, state, and local regulations.

DO NOT recharge, short, disassemble or heat the battery or dispose of it in a fire.

English

Voltage mark

DO NOT plug in before setting the voltage selector and all connection procedures are complete.

7